Application

Rolling-up speed doors with sectorized canvas and aluminum profiles can be used to close both interior and exterior openings.

For interior applications the maximum dimensions are: width up to 6 m and height up to 7 m.

For exterior applications these doors are suitable for wind speed up to 100 km/h and the maximum dimensions are: width up to 4 m and height up to 5 m. They are recommended for areas with intense traffic of people, forklift trucks, etc.

Standard Equipment Of A Roll-Up Speed Door

→ Maximum dimensions of the opening: width – 6 m , height – 7 m

→ Inverter control with controller, power supply 220 V

→ 24 V control voltage

→ Industrial geared motor from 0.75 to 2.2 kW

→ Emergency manual operation

→ Manual signal for opening/closing

→ Buttons or strings on consoles in front of the door

→ Precautionary sensors – 2 pcs. barrier infrared beams

→ Opening speed – 1.5 m/s

→ Galvanized steel frame which can optionally be powder coated with RAL colors

→ Screening panel made of sectors of reinforced PVC canvas interconnected by aluminum profiles. Transparent sectors can be added to the canvas, allowing visual contact through the door

            Operating The Door

The door opens when a signal is given either by button, rope on the console or any other automation and closes on submission of subsequent signal or after a pre-set amount of time.

If a signal is received from one of the precautionary sensors, the door will not close until the signal is canceled. When the door is in a process of closing and suddenly a signal comes from a precautionary sensor, the closing stops immediately. Then the door opens and does not start to close until the cancellation of the signal.

               Additional Options For Automation

→ Remote control – opens the door with the push of a button on the remote control and closes it after subsequent push or pre-set time

→ Sensors for movement and presence – when movement towards the door is detected in predefined zones in front of it, the door opens automatically and closes after time when there is no more movement in the zone

→ inductive loop integrated in the floor area in front of the door- when an object with metal parts enters the site, the inductivity of the loop changes, the door opens and remains open until the object goes out of the loop field

→ Precautionary barrier with a height of 2 m with a dense net of infrared beams which can be installed on one or both sides of the door

→ Precautionary infrared curtain which covers the whole opening of the door and a field in front of it and can be installed on one or both sides of the door

→ Precautionary laser curtain which covers the whole opening of the door and a field in front of it and can be installed on one or both sides of the door

→ Sensory bottom edge of the door

→ An option to synchronize the work of two or more doors

→ Every other desired way of controlling the door or a combination of the aforementioned

            An option for installation of sound signalization

            An option for installation of light signalization

Warranty – 3 years. The warranty covers all defects and malfunctions of the door which are not caused by outside factors.