Application

Roll-up speed doors with whole canvas and integrated metal profiles are used for exterior openings.

They are suitable for exterior openings with dimensions: width up to 6 m and height up to 5 m. They can withstand wind speed up to 120 km/h.

They are recommended for areas with intense traffic of people, forklift trucks and others.

            Standard Equipment Of A Roll-Up Speed Door

→ Maximum dimensions of the opening: width – 6 m, height – 5 m

→ Inverter control with controller, power supply 220 V   

→ 24 V control voltage

→ Drive- industrial geared motor from 0.75 to 2.2 kW

→ Emergency manual operation

→ Manual signal for opening/closing

→ Buttons or strings, placed on consoles in front of the door

→ Precautionary sensors – 2 pcs. barrier infrared beams

→ Operating speed – 0.8 m/s

→ Galvanized steel frame with optional powder coating with RAL colors

→ Screening panel, made of reinforced PVC canvas with integrated metal profiles. Transparent сцторс can be added to the canvas, allowing visual contact through the door

            Operating The Door

The door opens when a signal is given either by button, rope on the console or any other automation and closes on submission of subsequent signal or after a pre-set time.

If a signal is received from one of the precautionary sensors, the door will not close until the signal is canceled. When the door is in a process of closing and suddenly a signal comes from a precautionary sensor – the closing stops immediately. Then the door opens and does not start to close until the cancellation of the signal.

Additional Options For Automation

→ Remote control – the door opens with the push of a button on the remote control and closes after subsequent push or pre-set time

→ Sensors for movement and presence – when movement towards the door is detected in predefined zones in front of it, the door opens automatically and closes after time when there is no more movement in the zone

→ Inductive loop integrated in the floor area in front of the door – when an object with metal parts enters the site, the inductivity of the loop changes, the door opens and remains open until the object goes out of the loop field

→ Precautionary barrier with a height of 2 m with a dense net of infrared beams which can be installed on one or both sides of the door

→ Precautionary infrared curtain which covers the whole opening of the door and a field in front of it and can be installed on one or both sides of the door

→ Precautionary laser curtain which covers the whole opening of the door and a field in front of it and can be installed on one or both sides of the door

→ Sensory bottom edge on the door

→ An option to synchronize the work of two or more doors

→ Every other desired way of controlling the door or a combination of the aforementioned

            An option for installation of sound signalization.

            An option for installation of light signalization.

Warranty – 3 years. The warranty covers all defects and malfunctions which were not caused by outside factors.